Electric booster vehicle series design life of 3 years (25 degrees C)
Grid design and unique lead paste formula, charge acceptance ability, power saving
Valve controlled sealing structure, safety explosion-proof exhaust system, not only to solve the battery seal maintenance free principle,
And can solve the battery control equipment to the battery damage caused by the accident
No pollution, no corrosion, any direction can be placed in use (upside down)
Large current discharge, large starting current
Wide temperature range (-25-55 C)
Self discharge rate is very low
The rubber ring and resin double sealing, to ensure the sealing performance of a cell
Away from the fire source and heat source, do not use organic solvents to wipe the shell
Do not use the battery in the fully sealed container.
The battery can not be used in series with different capacity, different performance and different new and old batteries.
The battery terminals, connecting bars, screws, bolts to keep clean, to be installed in accordance with the provisions of the series, parallel circuit diagram
To connect. Is red, negative for the black (blue) color, do not answer, contact to prison, do not loose.
Immediately after the discharge of the battery recovery charge
Charging method with constant voltage and limited current is advisable
The use of floating charge, charging voltage of 2.23-2.27 V / 0.3CA cells, the maximum current (C rated voltage)
Cycle use, charging voltage of 2.4-2.5 volts per cell, the maximum current 0.3CA (C rated voltage)
Longer storage battery should be regularly given to supplement
A.20 -30 DEG C for 3 months, with 2.23 V / single constant pressure charging 5-8h
For 2 months at B.30, 2.23 volt / single constant pressure charging 5-8h